Click each step to see the action. You can also click the picture or use the arrow keys.

  • 1.

    Rotate the top and bottom of the base in opposite directions until you hear a click.

    The screw will be revealed on the base.

  • 2.

    Position the console with the rear side facing up.

  • 3.

    Remove the screw hole cap.

  • 4.

    Attach the screw hole cap to the bottom of the base.

  • 5.

    Remove the screw from the bottom of the base.

  • 6.

    Attach the base to the console.

  • 7.

    Insert the screw, then using a screwdriver or coin turn the screw clockwise to tighten.